National unified customer service hotline:
18071134559 (Manager Yu) 15871828100 (Manager Zhang) 13986033813 (Manager Xu) 18617107500 (Manager Xu)
Witness identification is an innovative application that combines face recognition technology with identity card recognition technology. 人脸识别身份证核查机。 Based on the needs of customers in the past two years, our company has independently developed a new generation of vertical multifunctional face recognition ID verification machines. 场人脸采集、身份验证、黑名单预警等功能为一体。 This product integrates on-site face collection, identity verification, and blacklist warning. 进行比对、并获取结果，全程自动化， 无需增加外围硬件配置，操作过程无需人工干预。 From reading ID information to collecting face photos on the spot, comparing them, and obtaining results, the entire process is automated without the need to add peripheral hardware configuration and the operation process does not require manual intervention. 数据采集平台或推送至现场执法客户端。 The collected information and comparison results can be uploaded to the big data collection platform in real time or pushed to the on-site law enforcement client.
1. Product introduction, technical communication, non-standard product design, troubleshooting.
1. Trustworthy contract to ensure timely delivery and keep in touch with customers at any time.
2. For special or complex products, our factory arranges technicians to train and guide users on product use, troubleshooting, tuning and maintenance.
1. The warranty period of the equipment is 12 months from the date of shipment from the factory.
2. During the use of our products, our factory regularly organizes technology visits to solicit user feedback on product quality, use conditions, and improvement opinions in order to further improve product quality.
1. Sales staff communicates with customers to determine the optimal execution plan that can meet the needs.
2. Provide customers with selection and quotation (price list).
3. Specific agreement: delivery time, special requirements, etc.
Customers have special requirements for products, and must provide the following instructions in the order contract:
1. Prepare the tools for installing the equipment and inventory the accessories according to the packing list.
2. After clarifying the system composition and working method, carry out overall planning and prepare to begin installation.
3. After the foundation of the equipment is installed, arrange the equipment.
4. After setting the hole position, drill the hole and embed M12 anchor bolts or expansion bolts.
5. Put the strong electric cable and the weak electric cable through 3/4 ″ PVC pipe respectively, and bury them in the corresponding position with cement.
6. Move each chassis to the corresponding installation position, first align the anchor bolts one by one.
7. Check whether the system composition and working method are correct, and after the check is correct, proceed to the next step.
8. Open the chassis door, select one of the devices as the reference (preferably the middle one as the reference), align the bolt holes of the base with the corresponding anchor bolts, and pre-tighten the nuts.
9. Open the door of an adjacent chassis, align the bolt holes of the base with the anchor bolts, and align the predetermined reference equipment, and pre-tighten the nuts; if there are multiple, install them and so on.
10. Refer to the wiring diagram, connect the power and control wires, and connect the system protective ground wire. After the condition check and function debugging are qualified, tighten the ground nut.
1. After swiping the card, the swing door does not open, there is no response, or it does not open automatically after power failure. Check again if the open signal cable is dropped, and check whether the open signal indicator on the motherboard has received the open signal. signal.
2. The working states of the direction indication are: the green arrow points to the left, to the right, or the red cross. If the direction indication does not respond, or the direction indicated is incorrect. You can switch to another test and try it with a good swap. Check the wiring again.
3. The channel gate has an automatic opening function after power failure. If it does not open after power failure, the reason is that the backup battery (battery) voltage in it is not enough, and the multimeter can be used to measure whether the voltage is above 10V.
4. After the access gate is swiped, one is on and one is off. Double-check that the sync cable is connected. Make sure that the motherboard that can't be opened has received the ON signal after connection. If not, recheck whether the wiring has dropped and whether the plug on the motherboard is properly inserted.
5. After swiping the card, the gate opens, but the gate does not close. This situation is usually the middle anti-pinch infrared is not right. Before fixing the case, you must make sure that the infrared is aligned so that the door can be opened and closed normally. If the infrared is not correct, an alarm will be displayed after power on. After swiping the card, please follow the direction arrow to exercise.
Copyright © 2019-2020 Wuhan Chinasoft Intelligent Technology Co., Ltd.
Headquarters Address: 15th Floor, Wuhan Optics Valley United International Building Contact: 027-87568430
Factory Address: Building A8, Xinbosheng (Jinmi) Industrial Park, No. 179 South Shahu Avenue, Tangxia Town, Dongguan
Sales manager: 18071134559 (manager Yu) 15871828100 (manager Zhang)
13986033813 (Manager Xu) 18617107500 (Manager Xu)Record number: Hubei ICP 07500413-11